Quick Lock Hydraulic Cement

Description

Quick Lock is a non-shrinking fast-setting hydraulic cement used to cover staples, fill in cracks or to patch holes in cementitious applications. Since Quick Lock can also be applied underwater it makes for a quick repair of very small leaks.

Surface Preparation
The area must be clean and free of any dirt, paint, dust, or grease. Use a V-shaped channel wherever possible to allow for the best adhesion. Dampen area prior to application (when not underwater).

Application
Mix approximately one part water to three parts Quick Lock in a bucket stirring continuously until the material has a dough-like consistency. Warm water will accelerate the setup time so mix only what you need in a 3 to 5-minute window. Using a trowel, sponge, or gloved hand, force material into a crack or onto a substrate that you are working with and shape it to consistency. Dampen material approximately for 10 minutes after patchwork to prevent cracking.

CAUTION

WARNING – THE EYE IRRITANT CONTAINS PORTLAND CEMENT. The product is alkaline in contact with water. Use a paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application, avoid contact with the eyes. In case of such contact, flood your eyes repeatedly with water and CALL A PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not ingest or take it internally. CONTAINS FREE SILICA – DO NOT BREATHE DUST. Prolonged exposure to dust may cause delayed lung disease (Silicosis https://www.lung.org/lung-health-and-diseases/lung-disease-lookup/silicosis/). WARNING: This product may expose you to chemicals, including silica, which the State of California recognizes as a cause of cancer. For more information, visit the Proposition 65 Warnings Website (www.P65Warnings.ca.gov). Use NIOSH (https://www.cdc.gov/niosh/) approved masks at all times to handle silica dust. KEEP OUT OF REACH OF CHILDREN.

SHELF LIFE
Up to six months from the date of manufacturing in an unopened, properly stored container.